Product Categories
Contact Us

Fortune Technology Company Ltd

Contact:Song Lee





Home > News > Content
Electric Scooter Manufacturer To Teach You Such As Replacing Tyres
Fortune Technology Company Ltd | Updated: Nov 02, 2016

1) when replacing the tires, needs Hexagon screwdriver and a Phillips screwdriver.

2) with a cross-head screwdriver loosen the lid out all of the screws (including screw on hand), and each side has 7.

3) below 6 screws on each side of the footboard, loose power switch on the other side of the six hex screws. Note: never turn the power switch side of the Hexagon bolts.

4) when after you unscrew these screws, cover with handle as the axis turning until the case without prejudice to remove the tire. There are some wires in the handle area, being careful not to break the wires. So you can replace the tire and inner tube repair.

5) when the repair is finished, install the cover to the original position and tighten the screws.

Electric Scooter manufacturer reminders usually pay more attention to the condition of the car, just do regular maintenance to prolong the service life of the electric unicycle, and protecting the safety of our trip.

Fortune Technology Company Ltd

If you have any enquiry about quotation or cooperation, please feel free to email us at or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Copyright © Fortune Technology Company Ltd All rights reserved.